MCINTOSH MA352 Integrated Amplifier

AED 29,700.00

  • The MA352 Integrated Amplifier is a hybrid design that combines the finest of vacuum tube and solid state audio design principles.
  • The result is an eye-catching amplifier that enjoys the best of these two opposing audio philosophies all while reproducing music at the highest quality level.
  • Features a vacuum tube preamplifier section that is powered by a pair of 12AX7A and a pair of 12AT7 vacuum tubes.
  • Output stage is a direct coupled solid state amplifier that outputs 200 Watts per channel into 8 Ohm speakers or 320 Watts per channel into 4 Ohm speakers.
  • Full of numerous McIntosh technologies including Power Guard®, Sentry Monitorâ„¢, McIntosh Monogrammed Heatsinksâ„¢, 5-Band analog tone control, Home Theater Pass Through, High Drive headphone amplifier with Headphone Crossfeed Director (HXD®), and Power Control.
  • Sits atop a beautiful polished stainless steel chassis with a classic McIntosh-styled die cast aluminum name badge attached to each side.

ELECTRONIC SPECIFICATIONS
Power Output per Channel:
– 200 Watts into 8 Ohms
– 320 Watts into 4 Ohms
Number of Channels:2
Speaker Impedance:4 or 8 Ohms
Rated Power Band:20Hz to 20kHz
Total Harmonic Distortion:0.03%
Dynamic Headroom:1.5dB
Frequency Response +0,-0.5dB:20Hz to 20kHz
Frequency Response, +0, -3dB:10Hz to 100kHz
Sensitivity Phono (Moving Coil):N/A
Sensitivity Phono (Moving Magnet):2.5mV
Sensitivity High Level (Balanced / Unbalanced):0.5V/0.25V
Sensitivity (Power Amp input):N/A
Signal To Noise Ratio (Moving Coil):N/A
Signal To Noise Ratio (Moving Magnet):82dB
Signal To Noise Ratio (High Level):93dB
Signal To Noise Ratio (Power Amp input):N/A
Input Impedance (Balanced / Unbalanced):20K/20K
Damping Factor:
– 8 Ohms: >200
– 4 Ohms: >100
Maximum Output (Balanced / Unbalanced):8V Unbalanced

CONNECTIVITY
Balanced Input:2
Unbalanced Input:3
Phono Input Moving Coil:0
Phono Input Moving Magnet:1 (adjustable loading)
Upgradeable Digital Audio Module:No
Digital Coaxial Input:0
Digital Optical Input:0
Digital MCT (DIN) Input:0
Digital USB Input:0
HDMI (ARC) Input:0
Balanced Variable Output:0
Unbalanced Fixed Output:0
Unbalanced Variable Output1
Headphone Output:
– 1/4″ High Drive with Headphone Crossfeed Director (HXD®)
Subwoofer Output:2
AM/FM Tuner option:No
Home Theater PassThru:Yes
Unbalanced Analog Connector Type:Standard
Speaker Binding Post Type:Standard
Service Port:1

DIGITAL AUDIO SPECIFICATIONS
Digital-to-Analog Converter (DAC) Type:N/A
Digital Coaxial Input Sample Rate:N/A
Digital Optical Input Sample Rate:N/A
Digital MCT (DIN) Input Sample Rate:N/A
Digital USB Input Sample Rate:N/A

CONTROL
Tone Controls:5-Band
Tone Bypass and Input Assign:Yes
RS232 Control Input:Yes
Power Control Output:1
Rear Panel Data Port:2
Rear Panel IR Sensor Input:Yes
Input Level Match:Yes

GENERAL SPECIFICATIONS
Vacuum Tube or Solid State:
– Preamplifier: Vacuum Tube
– Power Amplifier: Solid State
Output Type:Direct Coupled
Output Meters:Yes
Dual Layer Chassis:Yes
Chassis Finish:Polished stainless steel
McIntosh Monogrammed Heatsinksâ„¢:Yes
Power Requirement:120V 50/60Hz, 6.0A
Standby Power Requirement:<0.5 Watts

WEIGHTS & DIMENSIONS
Unit Dimensions (W x H x D):
– 17-1/2″ (44.5cm) x 9-7/8″ (25.1cm) x 17-7/16″ (44.3cm)
Unit Weight:66 lbs (29.9 kg)
Shipping Weight:75 lbs (34.0 kg)

Please note that although we endeavour to ensure that the product information displayed on our website is accurate and up to date, Products and their ingredients are liable to change. Due to this, You should always read the label before consuming or using the product and never rely solely on the information presented here. If You require information or have any queries regarding a Grano Organic Own Label product, please contact our Customer Care team. This information is supplied for personal use only and may not be reproduced in any way without the prior consent of Grano Organic and ackowledgement.