Burmester 175 Reference Turntable

AED 191,000.00

PHONO PREAMPLIFIER

  • Frequency Respone (+0.2dB/ -3dB): 16 Hz – 102 kHz (16 Hz – Subsonic Filter)
  • Output Noise Level: -71 dBV (unweighted 22.4 kHz)
  • Input Impedance (adjustable): 4.7 kΩ, 1.0 kΩ, 470 Ω, 330 Ω, 220 Ω, 100 Ω (suggested for factory shipped pickup)
  • THD at 1kHz/ 0.5mV: 0.0018 %
  • Gain at 1kHz: 70 dB
  • Channel difference: < 0.1 dB

DRIVE

  • Solid-aluminum chassis with cover plate
  • Stands are adjustable in height
  • Magnetic damper in floor plate for isolation
  • Three layer platter for optimized resonance
  • suppression (16,1kg)
  • Four AC synchronous motors and four belt
  • drive respectively

TONEARM

  • Multi layer carbon tube
  • Length of tonearm: 9 inches
  • Adjustment of azimuth via clamping screw
  • Adjustment of weight via fine thread
Category:

After more than 35 years of experience in the processing of finest audio signals, Burmester now crowns its series of successful phono preamplifiers with a turntable. Recognizable as a typical Burmester even from the very first glance, the 175 turntable makes use of characteristic design elements of the Reference Line. The integrated signal processing derived from the Burmester 100 phono pre-amplifier processes the fine phono signals at the highest level.

PLATTER
The turntable of the 175 record player has a sandwich construction consisting of two layers of aluminum and a further layer of brass in between. This design principle ensures optimal damping and less resultant resonances. The bitumen coating on the back side of the plate increases the damping properties even further. The platter bearing is designed to be maintenance free for life and therefore always ready for use. The sub-platter with a cone allows easy mounting of the platter and is centered automatically for perfect concentricity.

DRIVE – THE SQUARING OF THE CIRCLE
The 175 turntable is driven by four motors located in the outer square around the sub-platter. This squaring of the circle and the use of multiple belts ensures that no irregular tension arises on the central bearing. The two-fold design of this arrangement shortens the ramp-up time and improves synchronization. This simultaneously results in an improved sound and a fast starting time for the drive. Alongside the mechanical system and the arrangement of the drive components, the control electronics and the motors are also crucial for a great audio experience. The AC synchronous motors used are driven by digital motor electronics which perform their task with a high-precision oscillator and perfect sine and cosine voltages. The electronics are completely immune to fluctuations in the mains voltage frequency. Due to the high level of efficiency of the electronics, driver stages and motors, the entire unit remains cool and free from heat-related impairments.

TONE ARM
In addition to the drive, the cardanic mounted 9-inch tone arm with carbon tube acts as the guardian of an almost divine sound quality. Its bearing in the form of a hybrid bearing of steel and ceramic guarantees clean sampling of the vinyl treasures. The anti-skating is gradually adjustable via control knob.

Please note that although we endeavour to ensure that the product information displayed on our website is accurate and up to date, Products and their ingredients are liable to change. Due to this, You should always read the label before consuming or using the product and never rely solely on the information presented here. If You require information or have any queries regarding a Grano Organic Own Label product, please contact our Customer Care team. This information is supplied for personal use only and may not be reproduced in any way without the prior consent of Grano Organic and ackowledgement.