ELECTRONIC SPECIFICATIONS
Power Output per Channel:
– 100 Watts into 8 Ohms
– 160 Watts into 4 Ohms
Number of Channels:2
Speaker Impedance:4 or 8 Ohms
Rated Power Band:20Hz to 20kHz
Total Harmonic Distortion:0.03%
Dynamic Headroom:1.8dB
Frequency Response +0,-0.5dB:20Hz to 20kHz
Frequency Response, +0, -3dB:10Hz to 100kHz
Sensitivity Phono (Moving Coil):N/A
Sensitivity Phono (Moving Magnet):3.0mV
Sensitivity High Level (Balanced / Unbalanced):0.6V/0.3V
Sensitivity (Power Amp input):N/A
Signal To Noise Ratio (Moving Coil):N/A
Signal To Noise Ratio (Moving Magnet):80dB
Signal To Noise Ratio (High Level):97dB
Signal To Noise Ratio (Power Amp input):N/A
Input Impedance (Balanced / Unbalanced):20K/20K
Damping Factor:8 Ohms: >200 4 Ohms: >100
Maximum Output (Balanced / Unbalanced):8V Unbalanced
CONNECTIVITY:
Balanced Input:1
Unbalanced Input:2
Phono Input Moving Coil:0
Phono Input Moving Magnet:1 (fixed loading)
Upgradeable Digital Audio Module:No
Digital Coaxial Input:0
Digital Optical Input:0
Digital MCT (DIN) Input:0
Digital USB Input:0
HDMI (ARC) Input:0
Balanced Variable Output:0
Unbalanced Fixed Output:0
Unbalanced Variable Output:0
Headphone Output:1/4″ High Drive
Subwoofer Output:1 (mono)
AM/FM Tuner option:No
Home Theater PassThru:No
Unbalanced Analog Connector Type:Standard
Speaker Binding Post Type:Standard
Service Port:0
DIGITAL AUDIO SPECIFICATIONS
Digital-to-Analog Converter (DAC) Type:N/A
Digital Coaxial Input Sample Rate:N/A
Digital Optical Input Sample Rate:N/A
Digital MCT (DIN) Input Sample Rate:N/A
Digital USB Input Sample Rate:N/A
CONTROL
Tone Controls:Bass and Treble
Tone Bypass and Input Assign:Yes
RS232 Control Input:No
Power Control Output:1
Rear Panel Data Port:1
Rear Panel IR Sensor Input:No
Input Level Match:Yes
GENERAL SPECIFICATIONS
Vacuum Tube or Solid State:
– Preamplifier: Vacuum Tube
– Power Amplifier: Solid State
Output Type:Direct Coupled
Output Meters:No
Dual Layer Chassis:Yes
Chassis FinishPolished stainless steel
McIntosh Monogrammed Heatsinks™:Yes
Power Requirement:120V 50/60Hz, 3.7A
Standby Power Requirement:<0.5 Watts
WEIGHTS & DIMENSIONS
Unit Dimensions (W x H x D):
– 12″ (30.5cm) x 7-5/8″ (19.4cm) x 16-1/2″ (41.9cm)
Unit Weight:28 lbs (12.7 kg)
Shipping Weight:37 lbs (16.8 kg)
