SVS Ultra Tower Speakers

AED 9,680.00

  • Proprietary ForceFactor woofer array for deep, accurate bass.
  • Dual 6.5-inch midrange drivers for neutral voicing.
  • SVS SoundMatch 3.5-way Crossover for an expansive, focused soundstage.
  • Chamfered front baffle for clear sound staging.
  • Non-parallel side panels for room-filling bass.

Frequency Response / Acoustic Data
-Rated bandwidth: 28 Hz-32 kHz (+/-3 dB).
-Nominal impedance: 8 ohms.

-Sensitivity: 88 dB (2.83V @ 1 meter full-space, 300-3kHz).
-Recommended amplifier power: 20-300 watts.

Speaker Specs
-Floor Standing Tower Loudspeaker
-Real black oak veneer and piano gloss black finish options
-Dual gold-plated 5-way binding posts
-3.5″ wide-flared rear-firing port
-Cloth grille with pin/cup retention system
-Elastomer screw-in feet – adjustable for level

-Spiked metal screw-in feet included – adjustable for level
-Cabinet Dimensions: 45.6” (H) x 13.8” (W) x 16.5” (D) (without grille)
-Overall Dimensions: 45.6” (H) x 13.8” (W) x 16.8” (D) (with grille)
-Shipped Dimensions: 50.3″ (H) X 21.3″ (W) X 22.3″ (D)
-Weight Unboxed: 75.4 pounds
-Shipped Weight: 86 pounds

Driver Specs
1” Aluminum Dome Tweeter:
-FEA-optimized diffuser for airy and unveiled presentation
-Aluminum dome delivers exceptional transient response and exceptional stiffness/mass ratio

6.5” Midrange Drivers
-Composite glass-fiber cone with excellent stiffness/mass ratio for high sensitivity and pistonic behavior beyond pass band
-Aluminum shorting ring to reduce gap inductance, lower distortion, and enhance high frequency response
-Cast aluminum basket to ensure precise alignment of critical components and additional heat-sinking capacity
-Vented voice coil former to minimize air compression artifacts at high drive levels

8” Woofers
-Aluminum shorting rings to reduce gap inductance and lower distortion
-Long stroke motor and suspension for high output
-Vented voice coil formers to minimize air compression artifacts at high drive levels

Crossover & Cabinet Specs
-3.5-way crossover with premium-grade capacitors, air-core inductors and heavy-trace printed circuit boards
-Unique tapered midrange array miniimizes off-axis lobing and enhances radiated sound power into listening space
-Top midrange-to-tweeter crossover: 2 kHz
-Bottom midrange taper frequency: 700 Hz
-Dual midrange-to-woofer crossover: 160 Hz

Cabinet
-Separate sealed midrange enclosures minimize top-to-bottom wall dimensions and shift standing waves beyond the driver pass band, minimizing negative driver interaction and associated frequency response degradation
-Non-parallel cabinet panels reduces axial standing waves within the cabinet, reducing frequency response coloration
-Acoustically transparent and FEA optimized grilles, wedge-shaped front baffle and flush-mounted drivers all contribute to reduced edge diffraction and improved on-axis high frequency response
-FEA-optimized bracing, 1″ thick midrange/tweeter baffles and 1.5″ thick woofer baffles eliminates structural resonances and ensures the cabinet remains acoustically inert for uncolored response even at the highest drive levels

Please note that although we endeavour to ensure that the product information displayed on our website is accurate and up to date, Products and their ingredients are liable to change. Due to this, You should always read the label before consuming or using the product and never rely solely on the information presented here. If You require information or have any queries regarding a Grano Organic Own Label product, please contact our Customer Care team. This information is supplied for personal use only and may not be reproduced in any way without the prior consent of Grano Organic and ackowledgement.