ELECTRONIC SPECIFICATIONS
Number of Channels:2
Maximum Volts Out (Balanced / Unbalanced):16V RMS / 8V RMS
Sensitivity Phono (Moving Magnet):4.5mV
Signal To Noise Ratio (Moving Magnet):75dB
Voltage Gain (Moving Magnet):40dB
Total Harmonic Distortion:0.08%
Sensitivity High Level (Balanced / Unbalanced):900mV / 450mV
Signal To Noise Ratio (High Level):100dB
Voltage Gain (High Level):15dB
Input Impedance (Balanced / Unbalanced):44K ohm, 22K ohm
Frequency Response:
– +0, -0.5dB from 20Hz to 20kHz
– +0, -3dB from 15Hz to 100kHz
Sensitivity Phono (Moving Coil):0.45mV
Signal To Noise Ratio (Moving Coil):75dB
Voltage Gain (Moving Coil):60dB
CONNECTIVITY
Balanced Input:2
Phono Input Moving Magnet:1 (adjustable)
Digital Optical Input:0
HDMI (ARC) Input:0
Balanced Variable Output:2
Headphone Output:1/4″ High Drive with Headphone Crossfeed Director (HXD®)
Unbalanced Analog Connector Type:Premium gold-plated solid brass
Unbalanced Input:3
Upgradeable Digital Audio Module:No
Digital MCT (DIN) Input:0
Digital AES/EBU Input:0
Unbalanced Fixed Output:0
Input Level Match:No
Service Port:0
Phono Input Moving Coil:1 (adjustable)
Digital Coaxial Input:0
Digital USB Input:0
Balanced Fixed Output:0
Unbalanced Variable Output:0
Home Theater PassThru:No
CONTROL
Tone Controls:Bass and Treble
Power Control Output:2 Main, 2 Switched
Tone Bypass and Input Assign:
– Tone Bypass: Yes
– Input Assign: No
Rear Panel Data Port:5
RS232 Control Input:No
Rear Panel IR Sensor Input:Yes
GENERAL SPECIFICATIONS
Multi-Chassis or Single:Single, two layer
Power Consumption (On):50 Watts
Output Meters:No
Vacuum Tube or Solid State:Vacuum Tube: (5) 12AX7A and (1) 12AT7
WEIGHTS & DIMENSIONS:
Unit Dimensions (W x H x D):
– 17.5″ (44.45cm) x 6″ (15.24cm) x 18″ (45.72cm)
Unit Weight:25 lbs (11.3kg)
Shipping Weight:41.4 lbs (18.8kg)
