BasX A6
• Audiophile quality Class A/B output stage.
• Linear power supply with a hefty toroidal transformer and plenty of filtering.
• Designed to sound great with every speaker and all types of music.
• The perfect choice to drive three pairs of surround or height speakers.
The BasX A6 is a six-channel power amplifier that delivers 90 watts/channel into 8 Ohms and 125 watts/channel into 4 Ohms, all channels are driven, with a rated THD+N of <0.02%, and an A-weighted S/N ratio of 112 db. The BasX A6 features a heavy-duty linear power supply, high-quality Class A/B amplification, transparent fault protection, and a trigger input and output. High-quality industry standard unbalanced RCA inputs enable the BasX A6 to be used with almost any preamp or processor and audiophile-grade five-way speaker terminals accept banana plugs, spade lugs, or bare wire. These features combine to enable the BasX A6 to deliver true audiophile performance and sound quality at an amazingly affordable price.
The BasX A6 is a great choice if you're looking for a high-quality multi-channel amplifier to power three pairs of height speakers, or four pairs of height speakers and a pair of surrounds, or front wides and surrounds, extension speakers, or anywhere you need six channels of high-quality amplification. Also, with the use of a “y-adapter,” this amplifier would be the perfect solution for bi-amping your front stage.
| Size and Weight | |
|---|---|
| Dimensions (WxHxD) | 432mm x 102mm x 394mm |
| Weight | 16.33kg |
Audio Specifications |
|
| Power Output (ALL channels driven) | 90 watts RMS per channel; 20 Hz – 20 kHz; THD <0.1%; into 8 Ohms 125 watts RMS per channel; 1 kHz; THD <1%; into 4 Ohms |
| Power Output (two channels driven) | 120 watts RMS per channel; into 8 Ohms 175 watts RMS per channel; into 4 Ohms |
| Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load) | 20 Hz to 20 kHz (+ / – 0.02 dB) |
| Broad Band Frequency Response | 10 Hz to 80 kHz +0/-1.8 dB |
| THD + noise | <0.02% (A-weighted); ref rated power |
| Signal to Noise Ratio (8 Ohm load) | >112 dB; ref rated power; (A-weighted) |
| Minimum Recommended Load Impedance (per channel) | 4 Ohms (equals one 4 Ohm load or two paralleled 8 Ohm loads) |
| Damping Factor (8 Ohm load) | >500 |
| Input Sensitivity (for rated power; 8 Ohm load) | 1.2 V |
| Gain | 29 dB |
| Input Impedance | 27 kOhms |
Input and Output Connections |
|
| Input Connection | Unbalanced (RCA); one each per channel |
| Speaker Output Connections | Audiophile grade 5-way binding posts |
| Trigger | 5 – 12 V (AC or DC); <10 mA input current required 12 VDC; can drive any load up to 120 mA. |
Power Requirements |
|
| Power Requirement | 115 VAC or 230 VAC @ 50 / 60 Hz (automatically detected) |
Front Panel Controls and Indicators |
|
| Standby | Push button |
| Status LED | One per channel; blue |
| Status LED | Change to red to indicate a fault condition |
| Standby LED | Amber |
Rear Panel Controls |
|
| AC Power switch | Rocker switch (switches AC main power) |
| Status LEDs switch | Disables front panel Status LEDs |
Mechanical |
|
| Protection | The BasX A6 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions |
