Atollموزّع معتمد

PH100

Name: PH100
Brand: Atoll
SKU: ATOLL-PH100

Our phono preamp PH100 allow the use of low and high output MM/MC cartridges. The structure is pure double mono, its power supplies. are shielded.

اقرأ المزيد

لمحة سريعة

جميع المواصفات

Power supply: 6,4 VA
Total capacitance: 11,280 µF
Cell type: MM / MC
Input impedance: 47 k or 100 k(*)
Input capacitance: 100 pF or nothing(*)
MM gain: 40 dB(*)

السعر عند الطلبتحقّق من التوفر

اطلب السعر

ملفات للتنزيل1

نظرة عامة

The PH100 phono preamp is an external module with a specific power supply consisting of 2 high-end transformers (one per channel) with very low noise and 4 voltage regulators. The assembly is shielded by a metal box to preserve any interference on the audio stages. It is entirely made of discrete components and does not include any link capacitors. The configurations (MM/MC, input impedance) are directly accessible from the rear of the chassis.

أبرز المزايا

4 mm brushed aluminium front.
2 very low noise linear transformers 3,2 VA each.
4 regulated power supplies.
Total capacitance: 11,280 µF.
Signal/Noise Ratio at 1 kHz: 80 dB.
Crosstalk at 1 kHz: < -85 dB.
Frequency response (20 Hz -20 kHz): <0.1 dB.
THD: 0.05%.

المواصفات

الأبعاد (العرض × الارتفاع × العمق): 320 × 210 × 63 مم; العرض والارتفاع والعمق، دون الكابلات.
رمز الطراز: ATOLL-PH100; اذكره عندما تسأل أحد المختصين.

Connectivity

Ground: 1 Module signal output. 1 Turntable signal input. Settings block (Left channel). Settings block (Right channel).

Technical data

Power supply: 6,4 VA
Total capacitance: 11,280 µF
Cell type: MM / MC
Input impedance: 47 k or 100 k(*)
Input capacitance: 100 pF or nothing(*)
MM gain: 40 dB(*)
High-level MC gain: 47 dB(*)
Low-level MC gain: 60 dB(*)
Signal-to-noise ratio at 1 kHz: 80 dB
Crosstalk at 1 kHz: <-85 dB
THD: 0.05%
Dimensions: 320×210×63 mm
Weight: 2 kg (*) Depending on the switch position. (Data subject to change).