Parasound

NC 2250v2 Power Amp

Name: NC 2250v2 Power Amp
Brand: Parasound
SKU: PARASOUND-NC-2250V2-POWER-AMP

الطراز A2250 · السلسلة New Classic

275 Wpc stereo amp with bridged 750 W. THX Ultra2 certified, high-current design, dual speaker outputs, and efficient cool operation—premium power in a compact chassis.

اقرأ المزيد

لمحة سريعة

جميع المواصفات

Quieter: 1 mV

السعر عند الطلبتحقّق من التوفر

اطلب السعر

ملفات للتنزيل1

نظرة عامة

Studio-Level Two-Channel Power in a Compact Rack

The NC 2250v2 packs serious muscle into a 3U chassis—perfect for music lovers and home theater enthusiasts looking to upgrade without expanding their setup. It delivers clean, consistent performance even under heavy loads.

Designed for real‑world headroom, the NC 2250v2 delivers 275 W x2 into 8 Ω, 400 W x2 into 4 Ω (and 2 Ω with the load selector), or 750 W bridged mono, with Class‑AB topology, 45 A peak current, and THX Ultra2 certification. It adds dual A/B speaker outputs with lockout, a switchable 20/40 Hz high‑pass filter, Gold-plated RCA input jacks, and 12 V trigger or audio‑sense auto‑on.

Praised by reviewers

“Movie and music sources bound into life when channeled through these chunks of steel.” — AVForums.

“What goes in is literally what comes out.” — AVForums.

Awards & Recognition (with links)

AVForums — Highly Recommended (2023).

أبرز المزايا

THX Ultra2 certified
275 watts x 2 into 8 Ω (all channels driven)
400 watts x 2 into 4 Ω or 2 Ω (all channels driven)
750 watts x 1 bridged into 8 Ω or 4 Ω
45 amps peak current per channel
2 Ohm stable operation with load selector switch
Two pairs of speaker outputs with front panel A/B buttons
Rear-mounted lockout switch disables front A/B buttons
High pass filter, switchable for 20Hz or 40Hz
Automatic on/off by DC trigger with looping output
Automatic on/off by audio signal with 2 sensitivity settings
Fully discrete circuitry with high current toroid transformer
Bridging switch for stereo or mono operation
Efficient, low heat design
DC Servo and relay protection circuits
Rear-mounted left and right gain controls
Standby, channel status and high temperature indicators
Gold-plated RCA input jacks
Heavy duty 24k gold-plated 5-way speaker terminals
120/230v selector on rear panel
3U rack mount kit available separately (Model RMK33)

المواصفات

Specifications

Specifications: All Channels Driven 275 watts x 2, 8Ω 400 watts x 2, 4Ω 400 watts x 2, 2Ω (Load switch set to 2-3Ω) Bridged Mono 750 watts x 1, 8Ω 750 watts x 1, 4Ω (Load switch set to 2-3Ω) Current Capacity 45 amps peak per channel Frequency Response 20 Hz - 50 kHz, +0/-3 dB, 1 watt Dynamic Headroom - 1.6 dB Total Harmonic Distortion 0.20% at full rated output 0.015% at average listening levels IM Distortion - 0.05 % Transient IM Distortion - Not measurable S/N Ratio 114 dB at rated output, IHF A-weighted 106 dB at rated output, unweighted 93 dB at 2.828 V output, IHF A-weighted 84 dB at 2.828 V output, unweighted Input Impedance - 33 k Ω Input Sensitivity 1 V in for 28.28 V out, THX standard Inter-Channel Crosstalk 85 dB @1 kHz, 73 dB @10 kHz, 67 dB @ 20kHz Damping Factor - Over 150 at 20Hz 12V Trigger Turn On - DC 9 – 12V, 15 mA Audio Turn On
Quieter: 1 mV
Louder: 6 mV AC Power Requirement 110 - 120 V / 220 -240 V, 50 - 60 Hz 0.5 watts standby 35 watts Idle (no audio) 1000 watts full output Dimensions 17.25" Wide 18.5" Deep, with cables connected 6" High with feet, 5.25" panel only (3U) (437 x 470 x 153mm, 133mm panel only) Net Weight - 43 lbs (19.5 kg) Rack Mount Accessory
May be Purchased Separately: RMK33