انتقل إلى المحتوى
English
0
القائمة
Statement P5
Statement P5
Statement P5
Statement P5
Anthem

Statement P5

Flagship Reference 5-Channel Multi-Mono Power Amplifier with 325W per channel, Made in Canada

السلسلة Statement P

Flagship Reference 5-Channel Multi-Mono Power Amplifier with 325W per channel, Made in Canada The Anthem Statement P5 is a flagship 5-channel multi-mo...

اقرأ المزيد

لمحة سريعة

جميع المواصفات
الاستجابة الترددية
من 20 هرتز إلى 20 كيلوهرتز
القنوات
5
الوزن
59 كغ
Channels
5
Input Sensitivity
1.0 Vrms (100 W into 8 Ω)
Input Impedance
18kΩ (RCA), 22kΩ (XLR)
السعر عند الطلبتحقّق من التوفر

نظرة عامة

Anthem Statement P Series amplifiers don’t just join your system—they take command of it. Built for brutal control, effortless dynamics, and dead-silent backgrounds, P Series turns every speaker into a heavyweight. From thunderous low end to razor-sharp detail, this is reference power with zero apologies and zero excuses.

If you’re looking for “good enough,” look elsewhere.

If you want the last word in authority, clarity, and control—this is your corner.

المزايا

10
  • Proprietary Input Stage: Pure Signal Path

    The P2 and P5 start with Anthem’s own proprietary input topology—not a cookie-cutter differential stage. Eight hand-matched, low-noise bipolar devices run in a precision cascoded feedback array to drive distortion down, open up bandwidth, and lock in long-term reliability. Critical input pairs are heat-shrink sealed for tight thermal tracking, keeping the signal path ultra-clean, accurate, and distinctly Anthem.

  • Defiant Engineering: True Multi-Mono Design

    We don't share circuits. By design, the P2 and P5 amplifiers are powerful, independent monoblocks. Each channel is entirely self-contained, benefiting from its own glass-epoxy circuit board, heatsink, and an independent power supply. Since there is zero common audio path between channels, we eliminate crosstalk completely. This is not shared power; this is absolute channel isolation. The result is superb frequency-response channel matching and a musical picture that is seamless, exquisitely detailed, and presented on a multichannel soundstage that is astonishingly transparent, cohesive, and three-dimensional. This is definitive control.

  • Isolation Is Authority: Independent Power Supplies

    The P Series are simply the cleanest, quietest amplifiers in the industry. Why? Because we treat power dedication as law. Each amplifier channel features two separate and autonomous power supplies, fed from distinct transformer windings. This is not shared power; this is stable, continuous output at maximum volume, regardless of the number of channels being driven. While other amplifiers struggle and oscillate when driving low-impedance loads, the P2 and P5 remain perfectly stable under all conditions. If you push them into clipping, our proprietary Anti-Saturation Tracking Power Supply circuit takes over to ensure an immediate, seamless recovery. But that's not all, the use of a regulated power supply in the driver stage actively scrubs noise—eliminating the audible hum common in lesser designs. The result is an utterly silent noise floor.

  • Oversize Gold-Plated Binding Posts

    We ensure full power delivery right to your speakers with our custom-designed, oversize Gold-Plated Binding Posts. They are designed for ease of use, facilitate large speaker cable connectors, and guarantee maximum contact for a reliable signal transfer at all times.

  • RCA and XLR True-Balanced Inputs

    The P2 and P5 slide effortlessly into any system with dual-input flexibility. A rear three-way switch lets you choose RCA for standard connections, XLR for professional-grade balanced input, or attenuated XLR for preamps needing reduced levels. All connections are gold-plated to ensure the cleanest, highest-quality signal transfer.

  • Hand-Designed Circuit Boards

    Our military-spec FR-4 circuit boards, with plated through-holes and 2-ounce copper traces, ensure superior signal flow. Extensive power and ground planes minimize noise and block stray interference, delivering a pristine path that lets the music speak for itself.

  • Silent Cooling: Oversize Aluminum Heatsinks

    The P2 and P5 amplifiers are engineered for sustained high performance, which requires superior heat management. We incorporate more than 1,125 square inches of computer-modeled heatsink (including large serrated fins) per channel. This massive thermal infrastructure superbly dissipates the heat generated by the high power levels, eliminating the need for noise-inducing cooling fans. A dedicated thermal sensor on each heatsink continuously monitors the safe operating temperature, ensuring performance is always sustained and utterly silent.

  • Force Multiplied: Fourteen Bipolar Devices Per Channel

    An amplifier’s ultimate performance is directly proportional to the number of high-quality, high-current devices in its output stage. While some manufacturers cut corners to save cost in this critical area, our designers incorporated a staggering fourteen rugged bipolar output devices per channel. This is not an option; it is a necessity for achieving absolute authority. This commitment to hardware results in immense current held in reserve, delivering the effortless power required to handle the most complex musical crescendos and the visceral impact of cinematic thunder and explosions.

  • The Ultimate in Reliability: "No Fuse" Design

    The P2 and P5 amplifiers employ a proprietary Direct-Connected design to the power supply capacitor bank. This keeps output impedance remarkably low and makes more instantaneous power available to the amplifier, resulting in audibly superior performance, even into low- or complex impedance loads. If an output short circuit does occur, only the AC line breaker will trip—there are absolutely no fuses to replace in the signal path. Furthermore, the standby low-power supply is protected by self-resetting Positive Temperature Coefficient thermistors (PTCs). This means the circuit restores itself automatically once a tripped condition disappears, ensuring continuous reliability and eliminating downtime.

  • Designed and Built in Canada

    These Statement amplifiers are the definitive expression of North American engineering and build quality. The aesthetic speaks to the authority within: a fine-grain brushed aluminum cover, extruded aluminum handles, and a heavy-gauge, low-resonance 12-AWG steel chassis—all contributing to the serious high-end weight and structural integrity. Equipped with IEC AC female sockets and detachable, high-power 14-AWG AC power cords, the P2 and P5 are built for seamless integration and robust operation. For custom installations, rack-mounted versions can be ordered to complete the setup. Learn More

المواصفات

الاستجابة الترددية
من 20 هرتز إلى 20 كيلوهرتز
نطاق النغمات التي يعيد إنتاجها، من الجهير العميق إلى أعلى الحادّ.
القنوات
5
عدد مكبرات الصوت التي يشغّلها معًا: 2 للستيريو.
المداخل
Single-Ended, Balanced, Relay Trigger (3.5-mm Mono Jack)
المصادر التي يمكنك توصيلها.
الوزن
59 كغ
للوحدة الواحدة، خارج العلبة.
رمز الطراز
ANTHEM-STATEMENT-P5
اذكره عندما تسأل أحد المختصين.

Amplifier

Channels
5
Power Output RMS (Per Channel) 8Ω
325 W
Power Output RMS (Per Channel) 4Ω
500 W
Power Output RMS (Per Channel) 2Ω
675 W
Power Bandwidth
150 kHz (-3 dB at 325 W into 8 ohms)
Input Sensitivity
1.0 Vrms (100 W into 8 Ω)
Input Impedance
18kΩ (RCA), 22kΩ (XLR)
Voltage Gain
29 dB
Slew Rate
40 V/μs
Frequency Response
20 Hz - 20 kHz ± 0.15 dB 5 Hz to 100 kHz ± 2 dB
Channel Separation
--
Crosstalk
-140 dB (20 Hz), -80 dB (20 kHz)
Signal-to-Noise Ratio
125 dB (IEC-A, ref. 325 W)
Total Harmonic Distortion + Noise
0.0007% (1 kHz), 0.008% (20 kHz) @ 225 W
Intermodulation Distortion
CCIF (19 kHz + 20 kHz) 0.00019% @ 325 W
Damping Factor
>600 at 20 Hz 400 at 1 kHz

Inputs / Outputs

Inputs
Single-Ended, Balanced, Relay Trigger (3.5-mm Mono Jack)
Outputs
Speaker Binding Posts, Relay Trigger (3.5-mm Mono Jack)

General

Front Display
LED Status Indicator
Construction
Anodized Aluminum Faceplate with Aluminum Chasis
Switches
Front Panel: Power (On/Off) Rear Panel: 3 On/Off Modes (Trigger, Manual, Auto)
Weight
130 lb (59 kg)
Dimensions (D) (excluding Power Cord)
22-1/2 (57.2 cm)
Dimensions (W)
19-1/4" (49 cm)
Dimensions (H) (with feet)
9-3/8" (23.8 cm)
Height with Rackmount Kit
4U

Power Consumption

Idle
--
Typical Playback Levels
--
High Playback Levels
--
Low Power Standby
--

Power Requirement

Power Requirement
120V Version: In countries where the line voltage is 120 V, this product operates from a single phase AC power source that supplies between 108 V and 132 V at a frequency of 60 Hz. 220V-240V Version: In countries where the line voltage is 220, 230, or 240 V, this product operates from a single phase AC power source that supplies between 198 V and 264 V at a frequency of 50 Hz.

ملفات للتنزيل

2

المزيد من Anthem

منتجات مشابهة

السعر عند الطلباطلب السعر