Statement M1
Flagship Monoblock Amplifier in a Compact 1U Chassis, Bridgeable with Advanced Load Monitoring (ALM™)
الطراز 1510000001 · السلسلة Statement M
The Anthem M1 is a Canadian-made monaural amplifier. Discover its immense 1kW output, meticulous design, and advanced efficiency.
اقرأ المزيدلمحة سريعة
جميع المواصفات- القنوات
- 1
- الوزن
- 9.1 كغ
- Channels
- 1
- Input Impedance
- 10kΩ (RCA), 20kΩ (XLR)
- Voltage Gain
- 29 dB
- Slew Rate
- --
نظرة عامة
The M1 captures every sonic subtlety and complexity. It reproduces the full dynamic range of the recording, from the quietest detail to the most explosive crescendos. The output stage prevents clipping and adds no compression as output increases, delivering pure, effortless power that remains true to the source even at the highest volumes.
المزايا
12
Ruler-Flat Frequency Response
The M1 maintains a ruler-flat frequency response into any load through meticulous analog design, avoiding digital conversion or equalization. This ensures perfectly neutral sound, revealing the true character of your speakers. It remains stable into all loads, including open and short circuits, giving complete confidence in its performance under any conditions.
The Advantage of Efficiency
With a vanishingly low noise floor, the M1 is mechanically silent, suitable even for the quietest listening environments. Its exceptional efficiency generates minimal heat, allowing multiple units to be stacked safely—a space-saving solution for both home users and professional integrators. While Class D amplifiers are often cited as twice as efficient as conventional designs at full output, most amplifiers operate at a fraction of their capacity. At one-eighth of its maximum output—the typical working level—the M1 is six times more efficient than a conventional amplifier, delivering power quietly, coolly, and reliably.
Fun Fact:
At 4 ohms, where high-end speakers demand the most power, the Statement P5 delivers 500W. The M1 achieves 2,000W—a 6 dB advantage—providing total authority over your speakers.
Best Value in the Market
The M1 incorporates all the strengths of our award-winning Statement Class AB amplifiers but exceeds the capabilities of Class A, Class AB, and earlier Class D designs through exclusive Anthem technologies. It drives low-impedance speakers without difficulty, eliminates power line contamination, and ensures long-term reliability, delivering music and movies with breathtaking realism.
Separating Fact from Fiction
Contrary to popular belief, Class D is not inherently flawed. Most Class D amplifiers underperform because the technology has not been fully realized—not because of the architecture itself. The M1 uses proprietary Class D amplification developed through extensive R&D, achieving a level of performance that challenges expectations.
Not a Digital Amplifier
The M1 is purely analog, with no A/D or D/A conversion. Its control system continuously varies the width of the output pulse train in direct relation to the analog input signal. This produces pure analog power, fundamentally different from a digital stream of uniform pulses.
Slim Size, Immense Power
Weighing just 20 kg and occupying a single rack space, the M1 delivers 1,000W into 8 ohms and 2,000W into 4 ohms—proof that design, not size, determines power.
Cool-Running by Design
Its advanced cooling system moves heat efficiently from the interior to exterior heat sinks using sealed copper pipes with a special fluid under vacuum. This system is thousands of times more efficient than traditional metal heat sinks and eliminates the need for noisy fans, allowing multiple M1 units to be stacked safely.
A Critical Listener’s Dream
With virtually silent operation and a noise floor below that of a high-end preamplifier, the M1 delivers pure, natural sound in the quietest listening rooms. Proprietary Load Monitoring: A DSP monitors voltage, output current, and temperature without interacting with the load, ensuring consistent performance under all conditions. Power Factor Correction (PFC): A DSP monitors voltage, output current, and temperature without interacting with the load, ensuring consistent performance under all conditions.
Made in Canada
Engineered and manufactured with a defiant, independent spirit, the Statement M1 is proudly Made in Canada. Our commitment to local design and production allows our engineers to maintain absolute control over every detail, ensuring the final product delivers an experience defined by unrivaled quality and performance.
Built with Meticulous Detail
The hand-designed 4-layer FR4 circuit board with 2-ounce copper traces ensures minimal noise and inductance. Eight 65-amp MOSFETs per channel provide peak currents of 260A with high efficiency and low distortion. No relays in the signal path guarantee uninterrupted, reliable performance.
Bridged-Mode Amplification
The M1’s bridged design delivers lower resistance, higher speed, and improved sound quality while efficiently using the power supply and maintaining safety. Each output terminal reaches only 45 Vrms relative to chassis, even with 90 Vrms differential output.
المواصفات
- القنوات
- 1
- عدد مكبرات الصوت التي يشغّلها معًا: 2 للستيريو.
- المداخل
- Single-Ended, Balanced, Relay Trigger (3.5-mm Mono Jack)
- المصادر التي يمكنك توصيلها.
- الوزن
- 9.1 كغ
- للوحدة الواحدة، خارج العلبة.
- رمز الطراز
- ANTHEM-STATEMENT-M1
- اذكره عندما تسأل أحد المختصين.
Amplifier
- Channels
- 1
- Power Output RMS (Per Channel) 8Ω
- 1,000 W
- Power Output RMS (Per Channel) 4Ω
- 2,000 W
- Power Output RMS (Per Channel) 2Ω
- 2,400 W
- Power Bandwidth
- 5 Hz to 45 kHz (-3 dB at 1,000 W into 8 ohms)
- Input Sensitivity
- 100 mV (1 W output 8 Ω) 3.2 Vrms (1000 W output 8 Ω)
- Input Impedance
- 10kΩ (RCA), 20kΩ (XLR)
- Voltage Gain
- 29 dB
- Slew Rate
- --
- Frequency Response
- 8Ω = 20 Hz - 20 kHz ± 0.1 dB 4Ω = 20 Hz - 20 kHz ± 0.1 dB 2Ω = 20 Hz - 20 kHz ± 0.2 dB
- Channel Separation
- --
- Crosstalk
- --
- Signal-to-Noise Ratio
- 113 dB (IEC-A, ref. 1,000 W)
- Total Harmonic Distortion + Noise
- <0.06% (1 kHz) @ 1,000 W
- Intermodulation Distortion
- CCIF (19 kHz + 20 kHz) 0.003% @ 1,000 W
- Damping Factor
- >1400 at 20 Hz 800 at 1 kHz
Inputs / Outputs
- Inputs
- Single-Ended, Balanced, Relay Trigger (3.5-mm Mono Jack)
- Outputs
- Speaker Binding Posts, Relay Trigger (3.5-mm Mono Jack)
General
- Front Display
- LED Status Indicator
- Construction
- Anodized Aluminum Faceplate with Aluminum Chasis
- Switches
- Front Panel: Power (On/Off) Rear Panel: 2 On/Off Modes (XLR, RCA), 3 On/Off Modes (Trigger, Manual, Auto)
- Weight
- 20 lb (9 kg)
- Dimensions (D) (excluding Power Cord)
- 18 3/4" (47.6 cm)
- Dimensions (W)
- 19-1/4" (49 cm)
- Dimensions (H) (with feet)
- 2 1/4" (5.7 cm)
- Height with Rackmount Kit
- 1U
Power Consumption
- Idle
- 33 W
- Typical Playback Levels
- 300 W
- High Playback Levels
- --
- Low Power Standby
- <1.0 W (120V) <2.0 W (240V)
Power Requirement
- Power Requirement
- 120V Version: Where mains voltage is 120V, one dedicated 15A circuit per amplifier is recommended depending on speaker. A 20A circuit is adequate for two amplifiers playing music where speaker impedance is 8 Ω. This product operates from a single phase AC power source that supplies between 108V and 264V at a frequency of 50 or 60 Hz. 220V-240V Version: Where mains voltage is 120V, one dedicated 15A circuit per amplifier is recommended depending on speaker. A 20A circuit is adequate for two amplifiers playing music where speaker impedance is 8 Ω. This product operates from a single phase AC power source that supplies between 108V and 264V at a frequency of 50 or 60 Hz.
ملفات للتنزيل
3
- Statement M1 Operating Manualدليل الاستخدام · الإنجليزية · PDF، 283 كيلوبايتتنزيل
- Statement M1 Datasheetورقة المواصفات · الإنجليزية · PDF، 1.3 ميغابايتتنزيل
- Statement M1 Dimensional Drawingرسم تخطيطي · الإنجليزية · PDF، 214 كيلوبايتتنزيل
المزيد من Anthem
AnthemAVM 70 8Kالسعر عند الطلب
AnthemAVM 90 8Kالسعر عند الطلب
AnthemMCA 225 Gen 2السعر عند الطلب
AnthemMCA 325 Gen 2السعر عند الطلب
AnthemMCA 525 Gen 2السعر عند الطلب
AnthemMRX 1140 8Kالسعر عند الطلب
AnthemMRX 540 8Kالسعر عند الطلب
AnthemMRX 740 8Kالسعر عند الطلب
AnthemMRX SLM 4Kالسعر عند الطلب
AnthemStatement P2السعر عند الطلب
AnthemStatement P5السعر عند الطلب
AnthemSTR Amplifierالسعر عند الطلب
منتجات مشابهة
EmotivaBasX A1 Monoblock Power Amplifier2,390 د.إ.شامل ضريبة القيمة المضافة 5%
EmotivaXPA-1 Gen3السعر عند الطلب
EmotivaXPA-DR1 Differential Reference™ Monoblock Power Amplifierالسعر عند الطلب
EmotivaXPA HC-1 High Current Monoblock Amplifierالسعر عند الطلب
جديدParasoundJC1+ (Single Monoblock) Blackالسعر عند الطلب
جديدParasoundJCM250 (Single Monoblock)السعر عند الطلب
VincentSP-T70010,180.80 د.إ.شامل ضريبة القيمة المضافة 5%
Audio AnalogueABsolute Monoblock367,500 د.إ.شامل ضريبة القيمة المضافة 5%
جديدAudio ResearchReference 160M MkII86,915 د.إ.شامل ضريبة القيمة المضافة 5%
Audio ResearchReference 330Mالسعر عند الطلب
McIntoshMC1.25KW70,050 د.إ.شامل ضريبة القيمة المضافة 5%
McIntoshMC2.1KW244,100 د.إ.شامل ضريبة القيمة المضافة 5%



