انتقل إلى المحتوى
0
القائمة
CMS 503DC LP
CMS 503DC LP
CMS 503DC LP
CMS 503DC LP
CMS 503DC LP
CMS 503DC LP
CMS 503DC LP
Tannoy

CMS 503DC LP

الطراز 0301-AAV · السلسلة CMS

Full range ceiling loudspeaker with a Dual Concentric driver, only 98.6 mm deep behind the ceiling face

اقرأ المزيد

لمحة سريعة

جميع المواصفات
المعاوقة الاسمية
16 أوم
الاستجابة الترددية
من 88 هرتز إلى 22 كيلوهرتز
الوزن
4.7 كغ
Frequency response (-3 dB)
88 Hz - 22 kHz
Frequency range (-10 dB)
77 Hz - 24 kHz
Nominal coverage angle
90 degrees conical
السعر عند الطلبتحقّق من التوفر

اطلب السعر

نظرة عامة

The CMS 503DC LP is a full bandwidth 240-Watt high sensitivity loudspeaker that utilises our third generation Ceiling Monitor System technology (CMS 3.0). Thanks to an all-new proprietary 5" Dual Concentric point-source driver with Omnimagnet technology on a Torus Ogive Waveguide, the UL certified CMS 503DC LP delivers wide and consistent broadband directivity with enhanced intelligibility – plus highly accurate and linear response.

محتويات العلبة

  • C-Ring
  • tile-bridge kit
  • paint mask
  • cut-out template
  • grille

أبرز المزايا

  • Full range ceiling loudspeaker for installation applications
  • 60 Watts continuous, 240 Watts peak power
  • Next generation 5" Dual Concentric driver featuring Omnimagnet technology
  • Torus Ogive waveguide for improved high frequency response and directivity
  • Ultra-shallow depth profile for applications where cavity space is restricted
  • UL 1480 certified for general signalling systems
  • UL 2043 certified for air-handling spaces
  • Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input
  • Low insertion loss 30 W line transformer with easily accessible tapping switch
  • Optimised for LAB GRUPPEN low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel
  • Semi matt white finish fits unobtrusively in any environment
  • Powder coated UV resistant perforated steel mesh grille with dust protection
  • Removable magnetic grille for custom painting
  • Optional ARCO designer grilles available for minimal architectural impact
  • Self-aligning 4 way clamp mounting system
  • Mounting C-ring and ceiling tile rails included

عن Tannoy

Our Journey Tannoy is one of the world's most storied and prestigious audio brands, with a legacy spanning nearly a century. Rooted in British engineering, it has evolved from a wartime essential to a global benchmark for high-fidelity and professional sound.

جميع منتجات Tannoy

المزايا

2

  • Optimised for Installation

    Specifically designed with a 4 way self-aligning clamp system for fast, simple and cost effective installation, CMS 503DC LP features an ultra-shallow back can for applications where cavity space is limited, and a removable locking screw terminal connector with loop-thru functionality. A low-insertion loss 30 W transformer with convenient front panel tap switching, paintable powder coated steel mesh grille with dust protection, two tile support rails and one C-ring are all included. An Arco style grille, which conceals the entire unit for aesthetic purposes, and plaster (mud) ring are available separately.

  • LAB GRUPPEN Ready

    The CMS 503DC LP is finished in semi matt white and optimised for use with LAB GRUPPEN LUCIA amplifiers, which accommodate up to 8 CMS Series loudspeakers per channel.

المواصفات

المعاوقة الاسمية
16 أوم
الحمل الكهربائي الذي يغذيه المضخم. يتحقق منشئ الأنظمة منه مقابل المضخم الذي تختاره.
الاستجابة الترددية
من 88 هرتز إلى 22 كيلوهرتز
نطاق النغمات التي يعيد إنتاجها، من الجهير العميق إلى أعلى الحادّ.
الوزن
4.7 كغ
للوحدة الواحدة، خارج العلبة.
رمز الطراز
TANNOY-CMS-503DC-LP
اذكره عندما تسأل أحد المختصين.

Specifications

Frequency response (-3 dB)
88 Hz - 22 kHz
Frequency range (-10 dB)
77 Hz - 24 kHz
Frequency range (-10 dB)
—
Nominal coverage angle
90 degrees conical
Average
60 W
Programme
120 W
Peak
240 W
Recommended amplifier power
120 W @ 16 Ohms
Nominal impedance (Lo, Z)
16 Ohms
Average
107 dB
Peak
113 dB
Dual concentric point source driver
1 x 130 mm (5.0") Dual Concentric driver, using Omnimagnet technology
Low frequency
35 mm (1.38") voice coil, treated multi fiber paper pulp cone
High frequency
20 mm (0.79") PEI dome
Backcan
Zinc plated steel
Grille
Steel, with weather resistant coating
Safety features
Safety ring located at rear of enclosure for load bearing safety bond
Clamping design
Security toggle clamp Min / Max clamping range 9.5 mm (0.37") / 60 mm (2.36") Recommended clamp torque: 1.5 Nm
Blind mount (BM)
—
Pre install (PI)
—
Cable entry options
Cable clamp & squeeze connector for conduit up to 22 mm
Conduit knockouts on PI Backcan
—
Connectors
Removable locking connector with screw terminals with “loop through” facility
Bezel diameter
274.0 mm (10.79")
Front of ceiling to rear of backcan
98.6 mm (3.88")
BM model: Front of ceiling to rear of backcan
—
BM model: Front of ceiling to top of safety loop
—
PI model: Front of ceiling surface to rear of speaker unit
—
PI model: Front of accessory backcan bezel to top of safety loop
—
Hole cutout diameter (all models)
253.0 mm (9.96")
Net weight (ea)
4.7 kg (10.36 lbs)
CMS 803DC BM
—
CMS 803DC PI
—
PI Backcan
—
Included accessories
C-Ring, tile-bridge kit, paint mask, cut-out template, grille
Optional accessories
Plaster (mud) ring, Arco grille
Packed quantity
2

ملفات للتنزيل

1

المزيد من Tannoy

جميع منتجات Tannoy

منتجات مشابهة

In-Ceiling Speakers
السعر عند الطلباطلب السعر