Tannoy

CMS 803DC BM

Name: CMS 803DC BM
Brand: Tannoy
SKU: TANNOY-CMS-803DC-BM

الطراز 0301-ABE · السلسلة CMS

Full-range ceiling loudspeaker with a 200 mm (8.0") Dual Concentric driver and a pre-fitted blind-mount backcan

اقرأ المزيد

لمحة سريعة

جميع المواصفات

المعاوقة الاسمية: 16 أوم
Frequency response (-3 dB): 47 Hz - 30 kHz BM Backcan
Frequency range (-10 dB): 40 Hz - 35 kHz BM Backcan
Nominal coverage angle: 90 degrees conical
Average: 90 W
Programme: 180 W

السعر عند الطلبتحقّق من التوفر

اطلب السعر

المزايا2
ملفات للتنزيل1

نظرة عامة

The CMS 803DC BM is a full bandwidth 360-Watt high sensitivity loudspeaker that utilises our third generation Ceiling Monitor System technology (CMS 3.0). Thanks to an all-new proprietary 8" Dual Concentric pointsource driver with Omnimagnet technology on a Torus Ogive Waveguide, the UL certified CMS 803DC BM delivers wide and consistent broadband directivity with enhanced intelligibility – plus highly accurate and linear response.

محتويات العلبة

C-Ring
tile-bridge kit
paint mask
cut-out template
grille

أبرز المزايا

Full range ceiling loudspeaker for installation applications
90 Watts continuous, 360 Watts peak power
Next generation 8" Dual Concentric driver featuring Omnimagnet technology
Torus Ogive waveguide for improved high frequency response and directivity
Blind Mount version supplied with acoustically enhanced zinc plated steel back can
Integrated single unit construction for ease of installation
UL 1480 certified for general signalling systems
UL 2043 certified for air-handling spaces
Multiple transformer taps for 70 V and 100 V line systems or 16 Ohm direct input
Low insertion loss 60 W line transformer with easily accessible tapping switch
Optimised for LAB GRUPPEN low impedance LUCIA amplifiers with up to 8 CMS series loudspeakers per channel
Semi matt white finish fits unobtrusively in any environment
Powder coated UV resistant perforated steel mesh grille with dust protection
Removable magnetic grille for custom painting
Optional ARCO designer grilles available for minimal architectural impact
Self-aligning 5 way clamp mounting system
Mounting C-ring and ceiling tile rails included

عن Tannoy

Our Journey Tannoy is one of the world's most storied and prestigious audio brands, with a legacy spanning nearly a century. Rooted in British engineering, it has evolved from a wartime essential to a global benchmark for high-fidelity and professional sound.

جميع منتجات Tannoy

المزايا

Optimised for Installation
Specifically designed with a 5 way self-aligning clamp system for fast, simple and cost effective installation, CMS 803DC BM features an acoustically enhanced zinc plated steel back can, and a removable locking screw terminal connector with loop-thru functionality. A low insertion loss 60 W transformer with convenient front panel tap switching, paintable powder coated steel mesh grille with dust protection, two tile support rails and one C-ring are all included. An Arco style grille, which conceals the entire unit for aesthetic purposes, and plaster (mud) ring are available separately.
LAB GRUPPEN Ready
The CMS 803DC BM is finished in semi matt white and optimised for use with LAB GRUPPEN LUCIA amplifiers, which accommodate up to 8 CMS Series loudspeakers per channel.

المواصفات

المعاوقة الاسمية: 16 أوم; الحمل الكهربائي الذي يغذيه المضخم. يتحقق منشئ الأنظمة منه مقابل المضخم الذي تختاره.
رمز الطراز: TANNOY-CMS-803DC-BM; اذكره عندما تسأل أحد المختصين.

Specifications

Frequency response (-3 dB): 47 Hz - 30 kHz BM Backcan
Frequency range (-10 dB): 40 Hz - 35 kHz BM Backcan
Frequency range (-10 dB): 41 Hz - 35 kHz PI Backcan
Nominal coverage angle: 90 degrees conical
Average: 90 W
Programme: 180 W
Peak: 360 W
Recommended amplifier power: 180 W @ 16 Ohms
Nominal impedance (Lo, Z): 16 Ohms
Average: 112 dB
Peak: 118 dB
With THP60 - average: 110 dB
Dual concentric point source driver: 1 x 200 mm (8.0") Dual Concentric driver, using Omnimagnet technology
Low frequency: 44 mm (1.75") voice coil, treated multifiber paper pulp cone
High frequency: 25 mm (1.00") PEI dome
Backcan: Zinc plated steel
Grille: Steel, with weather resistant coating
Safety features: Safety ring located at rear of enclosurefor load bearing safety bond
Clamping design: Security toggle clamp Min / Maxclamping range 9.5 mm (0.37") /60 mm (2.36") Recommendedclamp torque: 1.5 Nm
Blind mount (BM): Complete with fixed backcan
Pre install (PI): Separate backcan for pre-installation
Cable entry options: Cable clamp & squeeze connector forconduit up to 22 mm
Conduit knockouts on PI Backcan: 3 Sets of horizontal positions19 / 22 / 28 mm (0.75" / 0.87" / 1.10")
Connectors: Removable locking connectorwith screw terminals with“loop through” facility
Bezel diameter: 319.0 mm (12.56")
Front of ceiling to rear of backcan: -
Front of ceiling to top of safety loop: -
BM model: Front of ceiling to rear of backcan: 310.5 mm (12.22")
BM model: Front of ceiling to top of safety loop: 327.7 mm (12.90")
PI model: Front of ceiling surface to rear of speaker unit: 125.6 mm (4.94")
PI model: Front of accessory backcan bezel to top of safety loop: 168.5 mm (6.63")
Hole cutout diameter (all models): 295 mm (11.61")
CMS 803DC BM: 8.5 kg (18.74 lbs)
CMS 803DC PI: 5.0 kg (11.02 lbs)
PI Backcan: 3.7 kg (8.1 lbs)
Included accessories: C-Ring, tile-bridge kit, paint mask,cut-out template, grille
Optional accessories: Plaster (mud) ring, Arco grille