Emotiva

XPA-1 Gen3

Name: XPA-1 Gen3
Brand: Emotiva
SKU: EMOTIVA-XPA-1-GEN3

Monoblock Amplifier

الطراز AMP-XPA-MONO-GEN3-1 · السلسلة XPA

The XPA-2 is a two-channel audiophile quality power amplifier, and is perfect for powering superb quality stereos and sound systems. Shop online today!

اقرأ المزيد

لمحة سريعة

جميع المواصفات

Gain: 29 dB
Maximum Power Consumption: 1,000 watts

السعر عند الطلبتحقّق من التوفر

اطلب السعر

المزايا5
ملفات للتنزيل1
أفلام1

نظرة عامة

The power amplifier performs the simple but critical job of boosting the output signals from each channel of your stereo preamp or surround sound processor to the level necessary to drive your loudspeakers. While this may seem trivial, a really good power amp is essential to having a great audio system, because any flaws in the performance of your power amp are going to limit the performance of your entire system. Every amplifier in the new Third Generation XPA series was carefully designed to deliver superb technical performance, unsurpassed sound quality, and an exceptionally accurate and dynamic rendition of all types of music, thus ensuring that your entire system will sound its absolute best. Each individual XPA amplifier is modular, and can be customized to provide exactly the power and number of channels you need today, and expanded later if your needs change; and multiple matching chassis enable you to add even more channels, or more power, for a near endless variety of options.

XPA-1

A new XPA-1 is a monoblock audiophile quality power amplifier, and is perfect for powering :

A superb quality stereo or 2.1 channel music system with a pair of XPA-1s.

The front stage main channels of a 5.1 channel or 7.1 channel home theater system with 3 XPA-1s.

Adding a pair of XPA-1 monoblocks to your current high-quality AVR is a great way to take your two-channel music listening to a whole new level of enjoyment.

Configuration:

1 x High-Powered Single-Channel Modules

(six module slots remain available for future expansion)

Power output:

300 watts/channel RMS into 8 Ohms; two channels driven

600 watts/channel RMS into 4 Ohms; two channels driven

Learn About Gen 3

المزايا

Sound Quality First
Designed first and foremost to sound superb in all types of audio systems with all types of music. Low noise, low distortion, wideband amplifier design with traditional Class A/B output stage ensures smooth, detailed sound, without a trace of strain or harshness. . Totally stable with real world speakers in real systems; not just on a test bench.
Modern Efficient Circuit Design
Optimized Soft-Switch Class H™ power supply topology delivers improved efficiency without compromising audio performance. Switched Mode Power Supply (SMPS) offers all of the performance of a traditional linear power supply, with improved efficiency and reliability, and reduced overall weight.
Quality Construction
Top quality parts and construction throughout for years of reliable trouble-free service. Heavy steel 4RU chassis with milled aluminum faceplate offers strength and rugged good looks. Solid machined gold-plated RCA input connectors provide a reliable connection with a wide variety of audio interconnects. Fully modular construction allows you to purchase as many channels as you need today, and then add more channels later when and if you need them. Designed, assembled, and tested in the U.S.A. at our plant here in Franklin, Tennessee
Flexible Signal Connections and Power Options
Gold plated five-way speaker binding posts with clear shields allow you to use a wide range of speaker cables with bare wires, lugs, or banana plugs. Choice of balanced or unbalanced input for each channel, independently controlled by reliable metal toggle switches. Remote trigger input and output allow the XPA-1 Gen3 to control and be controlled by other trigger-enabled equipment. World compliant AC line voltage operation enables the XPA-1 Gen3 to operate on any line voltage between 100 VAC and 250 VAC 50/60Hz. Standard IEC power inlet fits all standard IEC power cables and most custom audiophile power cables.
Protection
Audiophile-grade fault protection is entirely transparent under normal listening conditions, yet protects the amp and your other equipment from virtually all common faults. The XPA-1 Gen3 is protected from AC line faults by a rugged resettable rear panel push-button circuit breaker. Full five-year warranty ensures that you’ll be able to enjoy your XPA-1 Gen3 amplifier for years to come.

المواصفات

CIRCUIT TOPOLOGY

CIRCUIT TOPOLOGY: The XPA-1 Gen3 is a fully modular audio power amplifier with a high-efficiency switch mode power supply (SMPS), independent, fully discrete, dual differential, high current, short signal path Class A/B amplifier modules, Optimized Class H™ power supply topology, and microprocessor-controlled fault protection. The XPA-1 is powered by a high efficiency, audiophile grade, Switch Mode Power Supply (SMPS).

AUDIO SPECIFICATIONS

AUDIO SPECIFICATIONS: Audio Specifications (One High-Powered Single Channel Module):
Power Output: 300 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven 600 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven
Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB)
Broad Band Frequency Response: 5 Hz to 80 kHz +0/-2 dB
THD + noise: < 0.005%; at 100 watts RMS; 1 kHz; 8 Ohms.
Signal to Noise Ratio (8 Ohm load): > 117 dB; ref FTC rated power; unbalanced input (A-weighted) > 91 dB; ref 1 watt; unbalanced input (A-weighted)
Minimum Recommended Load Impedance (per channel): 4 Ohms (one 4 Ohm load or two paralleled 8 Ohm loads)
Damping Factor (8 Ohm load): > 500
Input Sensitivity (for rated power; 8 Ohm load): 1.71 V
Gain: 29 dB
Maximum Power Consumption: 1,000 watts
Note: The values shown refer to the amount of power the amplifier would consume while playing test tones continuously, on all channels, at full power, into a load bank. Therefore, they are not at all characteristic of what you would expect when playing music or the soundtrack from a movie. Normal audio signals are dynamic, so the amount of power they require from second to second varies widely, and the average is far lower than this. With normal content, even playing very loudly, one of our amplifiers will consume far less power than indicated in the chart, so these values should not be considered to be a circuit requirement for normal operation.
Input Impedance: 33 kOhms (balanced) 23.5 kOhms (unbalanced)

INPUT & OUTPUT CONNECTIONS

Input Connections (High-Powered Single Channel Modules): Unbalanced (RCA); balanced (XLR); one per channel, independently selectable.
Input Connections (Stereo Modules): 1 Unbalanced (RCA); 1 balanced (XLR); one per channel, independently selectable.
Speaker Output Connections: Audiophile grade, gold plated, 5-way binding posts.
Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required.
Trigger Output: 12 VDC; can drive any load up to 120 mA.

CONTROLS & INDICATORS

Standby: push button (halo ring changes color to indicate Standby or On)
Status LEDs: one per channel; blue Status LEDs change to red to indicate a fault condition
AC Power switch: rocker switch (switches AC main power)
Status LEDs switch: disables front panel Status LEDs and dims Standby button halo.
Input selector switches (one per channel): metal toggle switches; select between balanced and unbalanced inputs.
Circuit Breaker: press button to reset circuit breaker

POWER REQUIREMENTS & PROTECTION

Power Requirements: Between 100 VAC and 250 VAC @ 50 / 60 Hz (automatically detected).
Protection: The XPA Gen3 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions.

MECHANICAL

Dimensions: 17” wide x 8” high x 19” deep (unboxed; including feet) 17” wide x 7” high x 19” deep (unboxed; without feet) 24-1/2” wide x 12” high x 24-3/4” deep (boxed)
Weight: 33.5 lbs (unboxed) 40.5 lbs (boxed)