XPA HC-1 High Current Monoblock Amplifier

Emotiva

XPA HC-1 High Current Monoblock Amplifier

Name: XPA HC-1 High Current Monoblock Amplifier
Brand: Emotiva
SKU: EMOTIVA-XPA-HC-1-HIGH-CURRENT-MONOBLOCK-AMPLIFIER

الطراز AMP-XPA-MONO-HC-1 · السلسلة XPA

The XPA HC-1 is a true monoblock power amplifier and features a single high-power XPAGen3 amplifier module, powered by its own dedicated massive switch mode power supply (SMPS). Shop today!

اقرأ المزيد

لمحة سريعة

جميع المواصفات

Gain: 29 dB
Status LED: one; blue
Boxed: 28 lbs
Unboxed: 21.5 lbs

السعر عند الطلبتحقّق من التوفر

اطلب السعر

المزايا5
ملفات للتنزيل1

نظرة عامة

The XPA HC-1 is a single-channel (monoblock) power amplifier designed to drive one speaker with high output and strong control. It delivers 300 watts RMS into 8 ohms and 600 watts RMS into 4 ohms, which makes it a good match for speakers that need more power, or systems where you want more headroom and lower distortion at higher listening levels.

It uses a fully discrete, dual differential, short signal path Class A/B amplifier stage with Emotiva’s Optimized Class H power supply topology and a high-efficiency audiophile grade SMPS. Inputs include selectable balanced XLR and unbalanced RCA, and the speaker outputs use gold-plated 5-way binding posts. Protection is microprocessor-controlled for temperature, shorts, and other common fault conditions, and the front standby halo and status LED can be dimmed or disabled.

المزايا

Sound Quality First
Because each XPA HC-1 is a monoblock, each channel has its own amplifier and power supply, which helps reduce crosstalk and keeps the signal clean. The low-noise, low-distortion, wideband Class A/B design is built for smooth detail without harshness, and it is engineered to remain stable with real speakers in real rooms.
Modern Efficient Circuit Design
The XPA HC-1 uses Emotiva’s Optimized Soft-Switch Class H power supply topology to improve efficiency without sacrificing audio performance. Its high-efficiency SMPS is designed to deliver the performance you expect from a traditional linear supply, while reducing weight and improving overall reliability.
Quality Construction
Built with high-quality parts for long-term, trouble-free use, the XPA HC-1 combines a heavy steel chassis with a milled aluminum faceplate for strength and durability. It also uses solid, machined, gold-plated RCA connectors for a secure connection with a wide range of interconnects, and it is designed, assembled, and tested in the USA at Emotiva’s facility in Franklin, Tennessee.
Flexible Signal Connections and Power Options
Connectivity is straightforward and flexible, with audiophile-grade gold-plated five-way binding posts that accept bare wire, spades, or banana plugs, plus selectable balanced XLR and unbalanced RCA inputs via a sturdy toggle switch. A trigger input and output make system integration easy, and universal AC operation from 100 to 250 VAC with a standard IEC inlet means it works worldwide and supports most aftermarket power cables.
Protection
Protection circuits are designed to stay out of the way during normal listening while guarding against the common problems that can damage an amplifier or connected gear. The XPA HC-1 includes a rugged, resettable rear-panel circuit breaker for AC line faults, and it is backed by a full five-year warranty for long-term confidence.

المواصفات

CIRCUIT TOPOLOGY

CIRCUIT TOPOLOGY: The XPA HC-1 is a monoblock audio power amplifier, with a fully discrete, dual differential, high current, short signal path Class A/B amplifier section, Optimized Class H™ power supply topology, and microprocessor-controlled fault protection. The XPA HC-1 is powered by a high efficiency, audiophile grade, Switch Mode Power Supply (SMPS).

AUDIO SPECIFICATIONS

AUDIO SPECIFICATIONS: The XPA HC-1 features a single High-Powered Single Channel Amplifier Module.
Power Output: 300 watts RMS; 20 Hz – 20 kHz; THD <0.1%; 8 Ohms 600 watts RMS; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms
Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB)
Broad Band Frequency Response: 5 Hz to 80 kHz +0/-2 dB
THD + noise: < 0.015%; at 100 watts RMS; 1 kHz; 8 Ohms
Signal to Noise Ratio (8 Ohm load): > 120 dB; ref FTC rated power; unbalanced input (A-weighted) > 95 dB; ref 1 watt; unbalanced input (A-weighted)
Minimum Recommended Load Impedance: 4 Ohms
Damping Factor (8 Ohm load): > 500
Input Sensitivity (for rated power; 8 Ohm load): 1.71 V
Gain: 29 dB
Input Impedance: 33k Ohms (balanced) 23.5k Ohms (unbalanced)

INPUT & OUTPUT CONNECTIONS

Input Connections: Unbalanced (RCA); balanced (XLR); independently selectable
Speaker Output Connections: Audiophile grade, gold plated, 5-way binding posts
POWER REQUIREMENTS: Between 100 VAC and 250 VAC @ 50 / 60 Hz (automatically detected)

CONTROL & INDICATORS

Standby: push button (halo ring changes color to indicate Standby or On)
Status LED: one; blue
AC Power switch: rocker switch (switches AC main power)
Status LED switch: disables front panel Status LED and dims Standby button halo
Circuit Breaker: Press button to reset circuit breaker.

PROTECTION & MECHANICAL

Protection: The XPA HC-1 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions.
Dimensions: 8-3/8” wide x 7-5/8” high x 19” deep (unboxed; including feet and connectors) 24-3/4” wide x 12” high x 14-1/2” deep (boxed)
Boxed: 28 lbs
Unboxed: 21.5 lbs