Airmotiv XT2 Floorstanding Tower Loudspeakers (Pair)
Model SPK-AIR-FL-XT2-PR · Series Airmotiv
Airmotiv XT2 floor-standing speaker delivers rich, immersive sound with deep bass — perfect for music, movies, and mid-to-large home theaters.
Read moreAt a glance
All specifications- Frequency response
- 40 Hz to 27 kHz
- Cabinet tuning
- Rear ported
- Efficiency
- 90 dB (2.83V/1m).
- Power handling
- 250W continuous/500W peak
- Crossover Freq
- midrange/tweeter - 3.1 kHz
Overview
More volume is easy, effortless is rare.
Airmotiv XT2 Tower Loudspeakers are 3-way floorstanding speakers built for that easy power. The folded ribbon tweeter keeps detail airy without glare, the dedicated 5.25 inch midrange locks vocals and dialogue in place, and three 6 inch woofers deliver deep, controlled bass that stays tight as rooms get bigger. With stout internal bracing and tuned rear ports, XT2 fills mid to large spaces with calm authority for music and as serious home theater speakers.
Set them up with a quality stereo amplifier or an AV receiver that is comfortable with 4 ohm speakers, 100 watts or more recommended. Dual 5-way binding posts support bi-amping or bi-wiring for painless upgrades. The rotatable ribbon tweeter helps you fit the speaker to your layout, and the serviceable crossover design keeps future care simple. You get headroom, clarity, and bass you can feel at sane volumes, plus a clean look that belongs in a real living room.
Common uses
• Front left and right in a mid to large home theater
• Two channel music system where imaging and vocals matter
• Open concept living rooms that need real bass without boom
Curious how the XT2 will play in your room or with your amp? Reach out and talk with the actual people who design and build the gear.
Features
7

Discover the Airmotiv XT2
The new Airmotiv X loudspeakers share the same heritage of design sophistication, manufacturing quality, and the ability to deliver a truly awesome listening experience. Here are a few of the more important and interesting features of the Airmotiv XT2→

The Pinnacle of Three-Way Tower Design
The Airmotiv XT2 exemplifies superior three-way tower speaker design, featuring a cutting-edge 32mm Airmotiv folded ribbon tweeter, a 5.25” glass fiber cone midrange, and trio of 6” woofers. Its precise crossover, fitted with high-quality film capacitors and inductors, guarantees audiophile-standard sound.

Robust Construction
The XT2's sturdy, sound-pure HDF cabinet is heavily braced and covered with a satin finish lacquer front panel. It features contoured trim rings and a durable vinyl exterior, blending robustness with style.

Elegant Design Elements
The XT2 sports a sleek, magnetically attached grill, enhancing its appearance with meticulous detailing and the distinct Emotiva metal badge.

Customizable Sound
Tailor your listening experience with the XT2's custom bi-amp terminals, offering independent access to its woofer and midrange/tweeter for varied bi-amping or bi-wiring setups.

Seamless Integration
The XT2 is designed to blend flawlessly with both contemporary and older Airmotiv models, ensuring a cohesive and immersive sound environment.

Our Commitment to Quality
With a comprehensive five-year warranty, the XT2 stands as a testament to our commitment to enduring quality and customer satisfaction.
Specifications
- Frequency response
- 40 Hz to 27 kHz
- The range of pitches it reproduces, from deep bass to the top of the treble.
- Model code
- EMOTIVA-AIRMOTIV-XT2-FLOORSTANDING-TOWER-LOUDSPEAKERS-PAIR
- Quote it when you ask a specialist.
GENERAL
- Configuration
- Three-way floor standing tower loudspeaker pair. Painted HDF baffle, PVC laminated HDF enclosure. 31mm baffle, double window braced, extensively damped, with asymmetric midrange sub-enclosure
- Cabinet tuning
- Rear ported
DRIVER COMPLEMENT
- High frequency driver
- 1 ea.- 25mm x 32mm Airmotiv folded ribbon tweeter with Neo magnet system
- Midrange driver
- 1 ea. - 5.25” woven cone diaphragm, aluminum voice coil, milled aluminum phase plug, copper shorting ring, and NBR surround
- Low frequency driver
- 3 ea. – 6” woven cone diaphragm, aluminum voice coil, long throw motor, progressive rate spider, copper shorting ring, and NBR surround
ELECTRICAL SPECS
- Efficiency
- 90 dB (2.83V/1m).
- Power handling
- 250W continuous/500W peak
- Recommended amplifier power
- 100W or greater
- Nominal impedance
- 4-ohms nominal, safe with amplifiers rated for 8-ohm loads
- Frequency response
- 40 Hz - 27 kHz (+3/-3 dB)
- Crossover Freq
- midrange/tweeter - 3.1 kHz
- Crossover Freq
- woofer/midrange - 430 Hz Dual 5-way speaker terminals for bi-amping or bi-wiring
MECHANICAL
- Dimensions (per speaker,without feet)
- 44.75” high x 8.5” wide x 12.25” deep (Add 0.75” height and 1.75” width for feet; add 0.25” for grill) 50" x 17" x 14" (boxed)
- Weight (per speaker)
- 49 pounds (unboxed) 61 pounds (boxed)
- Mounting
- Permanently attached outrigger feet with non-mar neoprene pads. Detachable, adjustable spikes included
- Grille
- Black cloth over a rigid frame; attaches securely with powerful magnets for easy removalCOMPLIMENT
Downloads
1
- Airmotiv XA2 Height / Surround / Ceiling / Reflective Speakers (Pair) Airmotiv XA2 User ManualManual · English · PDF, 2.2 MBDownload
More from Emotiva
NewEmotivaAirmotiv XT1 Floorstanding Tower Loudspeakers (Pair)Price on request
EmotivaAirmotiv XT3 Floorstanding Tower Loudspeakers (Pair)Price on request
EmotivaNostala LB12Price on request
EmotivaAirmotiv XA2 Height / Surround / Ceiling / Reflective Speakers (Pair)Price on request
NewEmotivaAirmotiv XB1 Bookshelf Loudspeakers (Pair)Price on request
EmotivaAirmotiv XB2 Bookshelf Loudspeakers (Pair)Price on request
NewEmotivaAirmotiv XC1 Center Channel LoudspeakerPrice on request
EmotivaAirmotiv XC2 Center Channel LoudspeakerPrice on request
EmotivaAirmotiv XC3 Center Channel LoudspeakerPrice on request
EmotivaAirmotiv Vaulta™ In-Ceiling / In-Wall Loudspeaker (Pair)Price on request
EmotivaAirmotiv XS12e SubwooferPrice on request
EmotivaBalanced XLR to Unbalanced RCA Adapter InterconnectPrice on request
Similar products
NewBowers & Wilkins603 S3 BlackPrice on request
NewBowers & Wilkins702 S3 Gloss BlackPrice on request
NewBowers & Wilkins702 S3 Signature Datuk GlossPrice on request
NewBowers & Wilkins703 S3 Gloss BlackPrice on request
NewBowers & Wilkins704 S3 Gloss BlackPrice on request
NewBowers & Wilkins801 Abbey Road Limited Edition Vintage WalnutPrice on request
NewBowers & Wilkins801 D4 Gloss BlackPrice on request
NewBowers & Wilkins801 D4 Signature California Burl GlossPrice on request
NewBowers & Wilkins801 D5 Dark WalnutPrice on request
NewBowers & Wilkins802 D4 Gloss BlackPrice on request
NewBowers & Wilkins802 D5 Dark WalnutPrice on request
NewBowers & Wilkins803 D4 Gloss BlackPrice on request












