HCSE XLR-4

Name: HCSE XLR-4
Brand: T+A
SKU: T-A-HCSE-XLR-4

Headphone cable set with 4-pin XLR connector

T+A offers a selection of three headphone cables with different plugs. One of them is equipped with a 4-pin XLR connector (manufactured by Neutrik).

At a glance

All specifications

Measured values: 3 m cable lengst
Inductance: 1,7 µH
Capacity: 440 pF
Impedance: 630 mOhms

Price on requestCheck availability

Request a price

Features1

Overview

T+A offers a selection of three headphone cables with different plugs. One of them is equipped with a 4-pin XLR connector (manufactured by Neutrik). Its symmetrical wiring allows for a complete separation of the left and right channel. Severing the ground connection between both channels renders any adverse influences on sound quality which might arise in non-separated systems such as the standard jack plug all but impossible. All contacts are hard gold-plated and free of ferromagnetic materials. The HCSE XLR headphone cable is available in 3m and 5m lengths.

About T+A

Ever since 1978 our driving force has been curiosity. Our aim was to define the framework of the possible, and push its limits a little further each day, and that’s what formed the stone of this company. We always aspired to the creation of new findings rather than the exploitation of existing knowledge. We were determined to carve out our own advances, and not simply follow the progress of technology. Satisfying this goal requires our team of fifteen designers and developers to create every device in our headquarters in Herford. From the initial design, developing every single circuit board and finishing with the software code - the stage which brings all the component parts together to form a grand ensemble - our devices are built in Herford. They are permeated by the belief on which this company was founded, and which drives all of us forward every day. We don't build mass products, we build accoustic treasures, we build heartbeats, goosebumps and enthusiasm.

All T+A products

Features

Technology
Designing headphone cables is a completely different engineering task than designing speaker cables. Speaker cables have to deal with high currents and voltages, while headphones do the exact opposite: they work with lower currents and voltages. High quality materials and carefully meticulous design processes are prerequisites for making refined and accurate sounding headphone cables. We use pure OFC (Oxygen Free Copper) as a base and coat the conductors with pure silver. The impedance, capacity as well as inductance are low, and above all (are designed to offer) extraordinarily linear and constant characteristics over the entire frequency range. The left and right channels are separated, and each is constructed out of two signal cables (symmetrical design). Additionally, both are covered by a silver-plated shielding braid to prevent electrostatic charging and electromagnetic influences. The insulation is made of high-quality dielectric materials. Professional two-pin connections (plug and socket) are used on the headphone side.