Space-saving stereo amp with 120Wpc of Class A/AB power. The A23+ offers rich sound, clean detail, and versatile system flexibility in a compact chassis.
Read moreAt a glance
All specifications- Current Capacity
- 45 amps peak, per channel
- Slew Rate
- > 130 volts per microsecond
- IM Distortion
- < 0.04 %
- TIM
- Unmeasurable
- Total Gain
- 29 dB
- Damping Factor
- > 800 at 20 Hz
Overview
Two-Channel Power with Elegance and Precision
The Parasound A23+ brings studio-level amplification into your listening room—delivering clarity, depth, and control that defies its compact size.
Co‑designed by legendary engineer John Curl, it features a dual-mono Class A/AB architecture with independent transformers per channel. With 160 W per channel into 8 Ω (240 W into 4 Ω) and bridgeable to 500 W, along with balanced XLR and gold-plated RCA inputs, the A23+ integrates seamlessly into stereo or home theater systems.
Praised by reviewers:
SoundStage! – “Parasound provides great value… I haven’t heard better sound or seen higher build quality at this price. An impressive power amplifier.”
Home Theater Hi-Fi – “Solidly constructed and good‑looking amplifier… Balanced sonic characteristics with good presentation of musical details.”
The Audio Tailor – Highlights “transparency from a sonorous 5 Hz sub-bass right through to 100 kHz,” pointing to exceptional clarity and signal purity.
Highlights
- 160 watts x 2 @ 8 Ω RMS, both channels driven
- 240 watts x 2 @ 4 Ω RMS, both channels driven
- 500 watts x 1 @ 8 Ω, in bridged mode
- Circuitry designed by legendary John Curl
- High bias Class A/AB operation
- 45 amperes peak current per channel
- Stable with speaker impedance dips below 2 Ω
- Balanced inputs with discrete circuits
- Heavy-duty 24k gold-plated 5-way speaker binding posts
- Gold-plated RCA input & loop output jacks
- Direct-coupled signal path, no capacitors or inductors
- DC Servo and relay protection circuits
- AC turn-on inrush surge protection with relay bypass
- JFET input stage, MOSFET driver stage
- 12 beta-matched 15 ampere, 60 MHz bipolar output transistors
- 1.1 kVA shielded toroid transformer w/ independent windings for each channel
- Independent power supplies for input stage, driver stage and output stage
- 54,400 µF filter capacitors for output stages
- Full power is rated all the way down to 5Hz for unrestricted low-end bass
- Harris hyper-fast soft-recovery bridge diode rectifiers
- Automatic turn-on by 12 V trigger or audio sensing
- 2 rack space chassis with rear carry handles
- Rack mount hardware available separately
- Available in silver or black
Specifications
Specifications
- Power Output – Stereo Mode (0.06% THD)
- 160 watts x 2, 8 Ω both channels driven 240 watts x 2, 4 Ω both channels driven
- Power Output – Stereo Mode (0.9% THD)
- 210 watts x 2, 8 Ω both channels driven 300 watts x 2, 4 Ω both channels driven
- Power Output – Bridged Mode (0.06% THD)
- 500 watts x 1, 8 Ω Bridged 4 Ω operation is not recommended
- Power Output – Bridged Mode (0.9% THD)
- 600 watts x 1, 8 Ω Bridged 4 Ω operation is not recommended *All Power measurement are at 120 VAC, RMS continuous power, full audio band (20 Hz - 20 kHz)
- Current Capacity
- 45 amps peak, per channel
- Slew Rate
- > 130 volts per microsecond
- Frequency Response
- 5 Hz - 100 kHz, +0/-3 dB 20 Hz - 20 kHz, +0/-0.25 dB
- Total Harmonic Distortion (THD)
- < 0.06 % at full power < 0.03 % at typical listening levels
- IM Distortion
- < 0.04 %
- TIM
- Unmeasurable
- Inter-channel Crosstalk
- > 85 dB at 1 kHz > 70 dB at 20 kHz
- Input Impedance
- Unbalanced: 33 kΩ Balanced: 66 kΩ,(33 kΩ per leg)
- Total Gain
- 29 dB
- Input Sensitivity for 28.28 V Out (8 Ω Load)
- Unbalanced: 1 V Balanced: 1 V per leg
- S/N Ratio
- > 112 dB, input shorted, IHF A-weighted > 107 dB, input shorted, unweighted
- Damping Factor
- > 800 at 20 Hz
- DC Trigger Requirements
- +9 Vdc to +12 Vdc, 5 mA
- Audio Trigger Requirements
- 2 mV - 10 mV
- XLR Pin Identification
- 1 = Ground (Shield) 2 = Positive 3 = Negative (Return)
- Dimensions
- Width: 17-1/4" (437 mm) Depth: 15"-1/4" (388 mm) Depth, with cables 17" (432 mm) Height, with feet: 4-1/8" (105 mm) Height, without feet: 3-1/2" (89 mm), 2U
- Net Weight
- 27 lb. (12.2 kg)
- Shipping Weight
- 34 lb. (14.4 kg)
- Power Requirement
- Standby: <1 Watt Idle (no music playing): 75 Watts Typical Listening levels: 125 Watts Maximum: 800 Watts 110-125 VAC 60 Hz or 220-250 VAC 50 Hz AC mains voltage is set on rear panel
Downloads
1
- HALO A23+ Power Amp ManualManual · English · PDF, 396 KBDownload
Awards and press
5
The Parasound P 6 and Parasound A 23+ play together in a pleasingly balanced and precise manner, while still musical with tonality that tends toward warmth. The consistently very supple reproduction and simultaneously true-to-size presentation and pin-point positioning of individual instruments and voices is amazing. Yes, this is how HiFi is fun.
LowBeats (Germany) November 2020There is a lot to like in the reasonably-priced Parasound HALO A 23+ stereo amplifier. It is stylish, packs sufficient amplification power, and delivers solid high-fidelity sonic performance.
Secrets of Home Theater & High Fidelity, November 2020One strength is its capability to reproduce a wide sonic palette, with depth and plenty of micro information. Parasound's power amp is able to bring out the best bass from speakers. Different kinds of music made us appreciate the unusual character of this amplification. Outstanding!
ON-OFF (Spain) September, 2019Parasound provides great value in the Halo A 23+. I haven't heard better sound or seen higher build quality at this price. An impressive power amplifier.
Soundstage Network July 2019 Reviewer's ChoiceTogether, the Parasound P 6 and A 23+ are dynamite. Pure sonic magic with brilliant dynamics, delicious midrange and impressive resolution. To get such good sound for the price of this duo seems almost unnatural. One incredibly appealing preamp-amplifier package from Parasound.
Stereo+ (Norway) January 2019
More from Parasound
ParasoundHALO A31 3-Channel Power AmpPrice on request
ParasoundHALO A52+ 5-Channel Power AmpPrice on request
ParasoundJC5 Stereo Power AmpPrice on request
ParasoundNC 2125v2 Power AmpPrice on request
ParasoundNC 2250v2 Power AmpPrice on request
ParasoundNC 275v2 Power AmpPrice on request
ParasoundZC ZAmp V3Price on request
NewParasoundZoneMaster® ZM12Price on request
ParasoundZoneMaster® ZM2350Price on request
ParasoundZoneMaster® ZM4Price on request
NewParasoundHALO HINT6 Integrated Amp BlackPrice on request
ParasoundHALO P6 PreampPrice on request
Similar products
MarantzAMP 10 BlackPrice on request
MarantzAMP 20 BlackPrice on request
MarantzAMP 30 BlackPrice on request
NewMarantzMM7025 BlackPrice on request
NewMarantzMM7055 BlackPrice on request
NewMarantzMM8077 BlackPrice on request
EmotivaBasX A2+ Stereo AmplifierPrice on request
EmotivaBasX A2L+ Stereo AmplifierPrice on request
EmotivaBasX A3+ Three-Channel AmplifierPrice on request
EmotivaBasX A5+ Five-Channel Power AmplifierPrice on request
EmotivaBasX A6 Six-Channel Power AmplifierPrice on request
EmotivaBasX A7+ Seven-Channel Power AmplifierPrice on request




