Compact 1U stereo amp with 90 Wpc (bridgable to 200 W). THX Ultra2 certified, A/B speaker outputs, auto turn-on, high-pass filter—big sound, small footprint.
Read moreAt a glance
All specifications- Current Capacity
- 20 amps peak per channel
- Dynamic Headroom -
- 1.3 dB
- IM Distortion -
- 0.05 %
- Transient IM Distortion -
- Not measurable
- Input Impedance -
- 33 k Ω
- Damping Factor -
- Over 150 at 20Hz
Overview
Studio‑Level Two‑Channel Power in a Compact Rack
Drop the NC 275v2 into your system and the whole presentation tightens up—voices lock center‑stage, bass digs deep without bloat, and big moments stay calm, clear, and composed.
In just 1U, it delivers 90 W x2 into 8 Ω (150 W x2 into 4/2 Ω) or 200 W bridged mono. A fully discrete Class‑AB design with a high‑current toroidal transformer supplies clean current, while a switchable 20/40 Hz high‑pass filter and dual A/B speaker outputs make real‑world setups easy.
Praised by reviewers
“Delivers impressive dynamics and versatility at a reasonable price.” — Home Theater Forum (Martin Dew).
Highlights
- 90 watts x 2 into 8 Ω (all channels driven)
- 150 watts x 2 into 4 Ω or 2 Ω (all channels driven)
- 200 watts x 1 bridged into 8 Ω or 4 Ω
- 20 amps peak current per channel
- 2 Ohm stable operation with load selector switch
- Two pairs of speaker outputs with front panel A/B buttons
- Rear-mounted lockout switch disables front A/B buttons
- High pass filter, switchable for 20Hz or 40Hz
- Automatic on/off by DC trigger with looping output
- Automatic on/off by audio signal with 2 sensitivity settings
- Fully discrete circuitry with high current toroid transformer
- Bridging switch for stereo or mono operation
- Efficient, low heat design
- DC Servo and relay protection circuits
- Rear-mounted left and right gain controls
- Standby, channel status and high temperature indicators
- Gold-plated RCA input jacks
- Heavy duty 24k gold-plated 5-way speaker terminals
- 120/230v selector on rear panel
- 1U rack mount kit available separately (Model RMK11)
Specifications
Specifications
- Power Output - (RMS power, 20 Hz - 20 kHz) All Channels Driven
- 90 watts x 2, 8Ω 150 watts x 2, 4Ω 150 watts x 2, 2Ω (Load switch set to 2-3Ω)
- Bridged Mono
- 200 watts x 1, 8Ω 200 watts x 1, 4Ω (Load switch set to 2-3Ω)
- Current Capacity
- 20 amps peak per channel
- Frequency Response
- 20 Hz - 50 kHz, +0/-3 dB, 1 watt
- Dynamic Headroom -
- 1.3 dB
- Total Harmonic Distortion
- 0.35% at full rated output 0.025% at average listening levels
- IM Distortion -
- 0.05 %
- Transient IM Distortion -
- Not measurable
- S/N Ratio
- 110 dB at rated output, IHF A-weighted 103 dB at rated output, unweighted 93 dB at 2.828 V output, IHF A-weighted 84 dB at 2.828 V output, unweighted
- Input Impedance -
- 33 k Ω
- Input Sensitivity
- 800 mV for full rated output (28dB)
- Inter-Channel Crosstalk
- 80 dB @1 kHz, 72 dB @10 kHz, 65 dB @ 20kHz
- Damping Factor -
- Over 150 at 20Hz
- 12V Trigger Turn On -
- DC 9 - 12V, 15 mA
- Audio Turn On
- Quieter: 1 mV Louder: 6 mV
- AC Power Requirement
- 110 - 120 V / 220 -240 V, 50 - 60 Hz 0.5 watts standby 25 watts Idle (no audio) 350 watts full output
- Dimensions
- 17-1/4" Wide 16" Deep, with cables connected 2-1/2" High with feet, 1-3/4" panel only (1U) (437 x 406 x 63mm, 44.1 mm panel only)
- Net Weight -
- 20 lbs (9.1 kg)
- Rack Mount Accessory
- May be Purchased Separately RMK11
Downloads
1
- NC 275v2 Power Amp ManualManual · English · PDF, 514 KBDownload
Awards and press
1
Most satisfying, though, is the extreme sound quality this Bay Area team manages to extract from some of the most modest of physical profiles. The New Classic 275 v.2 is no exception to the rule. Stack two of these skinny slabs in your rack for Atmos flyovers, or plonk it on your desk with a streamer for a highly rewarding bask in your jazz collection. I don't think you will be disappointed.
Home Theater Forum, November 2021
More from Parasound
ParasoundNC 2125v2 Power AmpPrice on request
ParasoundNC 2250v2 Power AmpPrice on request
NewParasoundHALO A23+ Power Amp BlackPrice on request
ParasoundHALO A31 3-Channel Power AmpPrice on request
ParasoundHALO A52+ 5-Channel Power AmpPrice on request
ParasoundJC5 Stereo Power AmpPrice on request
ParasoundZC ZAmp V3Price on request
NewParasoundZoneMaster® ZM12Price on request
ParasoundZoneMaster® ZM2350Price on request
ParasoundZoneMaster® ZM4Price on request
ParasoundNC 200INT Integrated AmplifierPrice on request
ParasoundNC 200PRE PreamplifierPrice on request
Similar products
MarantzAMP 10 BlackPrice on request
MarantzAMP 20 BlackPrice on request
MarantzAMP 30 BlackPrice on request
NewMarantzMM7025 BlackPrice on request
NewMarantzMM7055 BlackPrice on request
NewMarantzMM8077 BlackPrice on request
EmotivaBasX A2+ Stereo AmplifierPrice on request
EmotivaBasX A2L+ Stereo AmplifierPrice on request
EmotivaBasX A3+ Three-Channel AmplifierPrice on request
EmotivaBasX A5+ Five-Channel Power AmplifierPrice on request
EmotivaBasX A6 Six-Channel Power AmplifierPrice on request
EmotivaBasX A7+ Seven-Channel Power AmplifierPrice on request



