EmotivaNew

XPA C

Name: XPA C
Brand: Emotiva
SKU: EMOTIVA-XPA-C

Compact Chassis Amplifier

Model AMP-XPAC-CHAS-1-1.0C · Series XPA

Discover the Emotiva XPA Gen3 Modular Amplifier System, a compact, high-performance home theater amplifier with flexible mono and stereo channel configurations. Featuring a 15" chassis, advanced Class A/B and Class H technology, and a powerful 3kW switch mode power supply, the XPA Gen3 delivers exceptional sound quality for music and movies. Perfect for custom home audio and high-end home theater setups.

At a glance

All specifications

Gain: 29 dB
- with 2 modules: 35.5 pounds (unboxed)
- with 3 modules: 39 pounds (unboxed)
- with 4 modules: 42.5 pounds (unboxed)

Price on requestCheck availability

Request a price

Features5
Downloads1
Films1

Overview

Before you write off “separates” as too big for your cabinet, meet the power amp that actually fits.

The XPA C Compact Chassis Power Amplifier brings our best-selling XPA Gen3 modular power amplifier platform into a shorter, cabinet-friendly 15-inch-deep chassis, so real home setups can finally get real amplifier control.

Hook it up to an AV processor, stereo preamp, or an AV receiver with pre-outs using XLR or RCA, then choose your channel layout by mixing mono and stereo modules across five bays. In use, that modular design means you can start simple and grow later, without replacing the whole amp. Under the hood you get a fully discrete Class A/B output stage plus a high-current switch-mode power supply with Soft-Switch Optimized Class H operation, so peaks hit cleanly and bass stays grippy when the mix gets demanding. Modules are installed by Emotiva or an authorized service center. Backed by a 5-year warranty.

Common uses:

• Add real headroom to a home theater power amp setup

• Take the strain off your receiver and clean up dynamics

• Build a modular system now, expand channels later

Not sure how many channels you should start with? Get in touch with us, we're here to help!

Features

Compact 15-Inch-Deep Chassis
We've brought the XPA Gen3 modular platform into a 15-inch-deep chassis that plays nicely with modern AV furniture. It’s a practical upgrade that does not demand a dedicated equipment rack.
Best-Selling XPA Gen3 Modular Platform
Five module bays let you configure the channels you need, using a mix of mono and stereo modules. Start small, then expand or reconfigure later, keeping the same chassis.
Flexible Connections
Each channel supports balanced XLR or unbalanced RCA, so it pairs easily with an AV processor, preamp, or receiver with pre-outs.
Clean, Controlled Class A/B Sound
Fully discrete Class A/B output stages deliver smooth detail and strong speaker control when music gets dynamic. Translation: clearer dialogue, tighter bass, and less harshness when you turn it up.
Smart Power and Built-In Protection
A high-current switch-mode power supply with Soft-Switch Optimized Class H operation helps the amp stay composed on peaks while running efficiently. Microprocessor-controlled protection helps safeguard against common faults, and it is backed by a 5-year warranty.

Specifications

PRODUCT KEY

PRODUCT KEY: First number is the total amount of channels Second number is the amount of High Power Modules Third number is amount of Stereo Modules
Ex: seven-3-2-c is seven total channels. 3 High Powered Modules and 2 Stereo Modules.

CIRCUIT TOPOLOGY

CIRCUIT TOPOLOGY: The XPA C Gen3 is a fully modular audio power amplifier with a high-efficiency switch mode power supply (SMPS), independent, fully discrete, dual differential, high current, short signal path Class A/B amplifier modules, Optimized Class H™ power supply topology, and microprocessor-controlled fault protection. The XPA C Gen3 is powered by a high efficiency, audiophile grade, Switch Mode Power Supply (SMPS).

AUDIO SPECIFICATIONS (High-Powered Single Channel Modules):

Power Output: 300 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven. 550 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven. 300 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven. 490 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven.
Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB).
Broad Band Frequency Response: 5 Hz to 80 kHz +0/-2 dB.
THD + noise: < 0.005%; at 100 watts RMS; 1 kHz; 8 Ohms.
Signal to Noise Ratio (8 Ohm load): > 117 dB; ref FTC rated power; unbalanced input (A-weighted). > 91 dB; ref 1 watt; unbalanced input (A-weighted).
Minimum Recommended Load Impedance (per channel): 4 Ohms (which equals one 4 Ohm load or two paralleled 8 Ohm loads)
Damping Factor (8 Ohm load): > 500
Input Sensitivity (for rated power; 8 Ohm load): 1.71 V
Gain: 29 dB
Input Impedance: 33 kOhms (balanced) 23.5 kOhms (unbalanced)

AUDIO SPECIFICATIONS (Stereo Modules):

Power Output: 65 watts RMS/channel; 20 Hz – 20 kHz; THD<0.1%; 8 Ohms; one channel driven 100 watts RMS/channel; 20 Hz – 20 kHz; THD<0.2%; 4 Ohms; one channel driven 65 watts RMS/channel; THD<0.1%; 8 Ohms; two channels driven 100 watts RMS/channel; THD<0.1%; 4 Ohms; two channels driven
Power Bandwidth (at rated power; 4 Ohm - 8 Ohm load): 20 Hz to 20 kHz (+ / – 0.1 dB)
Broad Band Frequency Response: 50 Hz to 80 kHz +0/-1.5 dB
THD + noise: < 0.02%; at 60 watts RMS; 1 kHz; 8 Ohms
Signal to Noise Ratio (8 Ohm load): > 105 dB; ref FTC rated power; unbalanced input (A-weighted) > 85 dB; ref 1 watt; unbalanced input (A-weighted)
Minimum Recommended Load Impedance (per channel): 4 Ohms (which equals one 4 Ohm load or two paralleled 8 Ohm loads)
Damping Factor (8 Ohm load): > 500
Input Sensitivity (for rated power; 8 Ohm load): 0.8 V (800 mV)
Gain: 29 dB 33 kOhms (balanced) 23.5 kOhms (unbalanced)

INPUT & OUTPUT CONNECTIONS

Input Connections (High-Powered Single Channel Modules): Unbalanced (RCA); balanced (XLR); one each per channel, independently selectable.
Input Connections (Stereo Modules): 2 Unbalanced (RCA); 2 balanced (XLR); two per channel, independently selectable
Speaker Output Connections: Audiophile grade, gold plated, 5-way binding posts
Trigger Input: 5 – 12 V (AC or DC); <10 mA input current required
Trigger Output: 12 VDC; can drive any load up to 120 mA
Power Requirements: Between 100 VAC and 250 VAC @ 50 / 60 Hz (automatically detected)

CONTROLS & INDICATORS

Standby: push button (halo ring changes color to indicate Standby or On)
Status LEDs: one per channel; blue Status LEDs change to red to indicate a fault condition
AC Power switch: rocker switch (switches AC main power)
Status LEDs switch: disables front panel Status LEDs and dims Standby button halo
Input selector switches (one per channel): Metal toggle switches; select between balanced and unbalanced inputs
Circuit Breaker: press button to reset circuit breaker

PROTECTION

PROTECTION: The XPA Gen3 is protected against excessive operating temperature, shorted speaker connections, ground faults, and other common fault conditions.

DIMENSIONS & WEIGHT

DIMENSIONS & WEIGHT: Dimensions (dimensions are the same for all
configurations): 17” wide x 8” high x 15” deep (unboxed; including feet) 17” wide x 7” high x 15” deep (unboxed; without feet) 24” wide x 12” high x 21” deep (boxed) Weight (weight will depend on the number of modules configured):
- with 2 modules: 35.5 pounds (unboxed)
- with 3 modules: 39 pounds (unboxed)
- with 4 modules: 42.5 pounds (unboxed)
- with 5 modules: 46 pounds (unboxed) * For boxed weight, add 5 lbs to the above weights